Is Soft Washing Safe for Historic Homes and Brick?

Yes, soft washing is safe for historic homes and brick, as long as it's done gently: low pressure, the right cleaner, and a test spot first. What hurts old brick and old wood isn't cleaning, it's blasting them with a pressure washer.

If you own one of the older homes downtown, or a brick ranch in Trent Woods or River Bend, here's what you need to know before anybody points a wand at your house.

Why old brick needs a lighter touch

Brick looks tough. And it is, until you hit it with high pressure.

Older brick is usually softer than new brick, and the mortar between it is often softer still. The National Park Service, which publishes the go-to guides on caring for historic buildings, says high-pressure water "is very abrasive" and can etch soft stone and some types of brick (Preservation Brief 1). Their rehab guidelines list high-pressure water cleaning that damages historic masonry as something to avoid (NPS rehabilitation guidelines, masonry).

Once that face of the brick is worn off, it doesn't grow back. The brick soaks up more water, and more water means more mildew and more damage down the road. So the "quick blast" ends up costing you twice.

What the preservation folks recommend

The NPS keeps coming back to one idea: use the gentlest method that gets the job done. Their brief says water cleaning methods are "generally the gentlest means possible," and that any testing should start with the gentlest option first.

Here's what that looks like in plain English:

  • Start low. The brief suggests starting at very low pressure, 100 psi or below, and generally staying no higher than 300 to 400 psi.

  • Test first. Try the cleaner on a spot nobody looks at before doing the whole wall.

  • Let the cleaner do the work. Mold and mildew on masonry can usually be removed with a low-pressure wash, with a mild detergent and a soft brush if needed.

  • Watch the weather. The NPS warns that water cleaning should never be done if there's a chance of frost or freezing, because water inside the brick can freeze and crack it. A wall can take over a week to dry.

That last one matters this time of year. If a hard freeze is in the forecast, we wait. Your brick will still be there next week.

That's what soft washing already is

None of this is new to us. It's how we wash every house.

We soft wash siding, brick and trim. High pressure is only for concrete, like driveways and sidewalks. Our Perfectly C.L.E.A.N.™ process goes like this:

  1. Cover: wet down and protect your plants and fixtures first

  2. Low-pressure: apply the cleaning solution gently, no blasting

  3. Eliminate: kill the algae and mildew at the root so it doesn't come right back

  4. After-rinse: rinse everything off, plants included

  5. Notify: send you photos when we're done

The cleaner kills the growth. The rinse carries it away. No one is carving the face off your brick with a zero-degree tip.

If your house is in a historic district

New Bern takes its historic districts seriously, and that's a good thing. It's a big part of why downtown looks the way it does.

The city's design guidelines say a Certificate of Appropriateness is required before making changes to the exterior of a property in the historic districts. They also define normal maintenance and repair as work that doesn't involve a change in material or design (New Bern Historic District Guidelines).

A gentle wash doesn't change your materials or your design. But I'm a pressure washing guy, not the city, and the guidelines tell owners to check with Development Services when they're not sure. A quick call to the city's historic preservation office before a big project never hurts. And if anyone tells you the plan is to paint or seal your brick, check with the city first.

Signs your brick or older siding needs a wash

You don't need to wait until it's ugly. Look for:

  • Green or black film on the north side or the shady corners

  • Dark streaks under windowsills and gutters

  • Green showing up in the mortar lines

  • Wood trim and porch ceilings going gray or spotted

Around here, the humidity off the Neuse and the Trent, plus big old shade trees, make the perfect home for that stuff. We see it a lot on shady lots downtown and in Trent Woods.

Questions we hear a lot

Will it hurt my plants? No. We wet them down before we start and rinse them after. That's the "Cover" and "After-rinse" in our process.

How long does it take? Most house washes take about an hour and a half to two and a half hours.

What if I'm not happy with how it looks? We come back and fix it free. That's our guarantee.

Getting your quote

We price every house in person, because no two houses are the same, and old houses even less so. We'll come out on a weekday evening for a free estimate. It takes about 15 minutes, and you get a written quote before we leave. If you've used us before, we can get you a quote without a visit.

If you've got family coming for the holidays, or you're showing the house off during Tryon Palace's Candlelight evenings on December 12 and 19, now's a good time to get on the schedule.

Call or text us at 252-422-4377 to set up a free estimate, or get a quote at quote.ncprowashpressurewashing.com.

Mike Reynolds, Pro Wash Pressure Washing. Veteran-owned, 700+ homes cleaned around New Bern, Trent Woods and River Bend.

Next
Next

Got an HOA Mildew Letter? What to Do Before the Fine